Natural slate, clay tile, cedar shake, and copper, plus full historic restoration, for North Texas homeowners who want a roof that is part of the architecture, not just protection from the weather.

Specialty roofing asks more of a contractor than a standard tear-off and re-shingle. Slate and clay tile add thousands of pounds to a roof and need their structural load checked before a single piece goes up. Cedar shake lives or dies on ventilation and the right treatment for a hot, humid Texas summer. Copper has to be hand-formed and soldered on site, not ordered pre-bent from a catalog. Historic restoration means matching profiles and details that stopped being manufactured decades ago.
Blue Lake Roofing & Remodeling has installed and restored these roofs across Tarrant, Collin, Denton, and Dallas counties since 1995. It is the same licensed, family-run crew that handles our shingle and metal work, held to a higher standard of material handling and finish detail. We are not a separate specialty outfit that disappears after the install, and we are not learning the material on your roof.
Natural slate installed with correct structural support and flashing detail for a 75 to 100 year lifespan.
Clay and concrete tile systems built for the load, underlayment, and heat demands of North Texas.
Natural and fire-treated cedar shake, installed to current North Texas fire-code requirements.
Hand-formed copper, standing seam, and full historic roof restoration matched to a home's original architecture.
Specialty roofing is not a phone-quote service. We start with an on-site visit: we get on the roof, check the deck and framing, measure the pitch and the details, and photograph the existing conditions. For slate and tile we confirm whether the structure carries the load as-is or needs reinforcement. For historic homes we document the original profiles and flashing so a restoration reads as original.
Then you get an itemized proposal with the real material, the real labor, and the real timeline, so you can compare it honestly against asphalt or metal. If a specialty roof is not the right call for your home or your budget, we will tell you that too.

Not every roof frame carries the added weight of slate or clay tile without reinforcement. Slate can run 800 to 1,500 pounds per roofing square and clay tile 600 to 1,100, versus roughly 250 for asphalt shingle. We assess structural capacity on-site as part of every specialty consultation, before recommending the material or pricing the job.
Natural slate and copper are the longevity leaders, commonly 75 to 100 years or more when installed correctly. Clay tile falls in a similar range for the tile itself, with underlayment replacement partway through. Cedar shake is the shortest of the four at roughly 30 to 40 years in North Texas, and depends heavily on ventilation and maintenance.
Yes. We restore and repair roofs in older neighborhoods and historic districts across Fort Worth and Dallas, matching original profiles, flashing, and copper detailing so repairs and additions read as original rather than patched. We can also work within historic-district review requirements when they apply.
If your existing roof was slate, tile, cedar, or copper and it was storm-damaged, your policy generally covers replacement with like materials. If you currently have asphalt and want to upgrade to a specialty material, insurance covers the asphalt-equivalent scope and you cover the difference. We document everything either way.
It varies widely by material and roof complexity. Cedar shake and clay tile typically run two to four times an architectural asphalt roof, and slate and copper can run higher. We give real, itemized numbers after an on-site assessment, never a ballpark over the phone.
Get a real on-site consultation on slate, clay tile, cedar shake, or copper for your DFW home.